Skype:ejcjck@ejpetro.com  WhatsApp:13837709330,13782056525 
Product

Home >> OILWELL LOGGING >> Oilwell testing truck >> ES5180TCS OILWELL TEATING

ES5180TCS OILWELL TEATING

  Chassis: The chassis used on the truck is a Manitowoc Dongyue heavy chassis with a TA517JQZQY12F model hoist. With large carrying capacity, the full load mass can reach 44092lb. A 6×4 drive is adopted and its cruise performance is excellent.
 Hoisting System: The hoisting arm is using a three-segment telescopic structure. Its second and third segments can be shrunk synchronously with a maximum working height of 72.18ft. The following functions can be completed hydraulically: rig up, rotation, breadth adjustment and telescopic activity as well as support- leg reset. Meanwhile, it utilizes a mutually-locked, dual-control system so that it can work with stability, safety and reliability.
 Hydraulic System: It is equipped with a two-pump system for hoisting operations to ensure swift, high efficiency and energy-saving lifting up and down. It is equipped with safety devices, including: overflow valves, balance valves, hydraulic locks and an emergency pump. The main hydraulic elements are imported to keep the performance safe, stable and reliable.
 Grease System: It is equipped with an imported high-pressure pneumatic grease-filling pump with a maximum output pressure of 14285psi. The air compressor is driven by a hydraulic motor and the grease-filling pressure can be adjusted continuously in order to meet blowout-protection and pressure requirements during well testing and logging operations. The open type grease storage tank is convenient for use.
 Auxiliary Devices:  The instrument rack and grease-filling pump case use mechanical or airbag clamping devices. Air pipelines and grease-filling pipelines are configured with winding wheels for convenient applications.
 This compact truck is convenient for a variety of operations and can be used under different working conditions.
 

Product model

ES5180TCS

Chassis model

TA5171JQZQY12F

Engine

CA6DF3-18E3

Power (hp)

177.02

Truck mass(Ib)

38713

Maximum total mass(Ib)

39143

Wheel base       (ft)

12.68 +4.17

Test mast

 

 

 

 

Whole telescopic arm+ secondary arm maximum hoisting height(ft)

28.7

Supporting leg span (ft) (vertical x horizontal)

13.78x15.10

Hoisting system

Maximum working pressure of grease-filling pump ( FT)(psi)

14285.71

Rated working pressure of air compressor (FT)(psi)

114.28

Discharge capacity of air compressor (m3/min)

0.67

Rated rotary speed (r/min)

1000

Overall size (ft)

35.10×8.20×10.49

 

Previous:              Next: ES5061TCS OILWELL
Home | Chinese | Russian | Contact Us |     Copyright © RG PETRO-MACHINERY(GROUP)CO.,LTD. All Rights Reserved.