Skype:ejcjck@ejpetro.com  WhatsApp:13837709330,13782056525 
Product

Home >> OILWELL LOGGING >> Oilwell testing truck >> ES5050TSJ OILWELL TESTING TRUCK

ES5050TSJ OILWELL TESTING TRUCK

  The truck can be designed with 5 according to users’ requirements.
 Chassis: The chassis used on the truck is a NJ6683NR6 IVECO chassis with open doors at the side and rear of the truck. An electrical- spray diesel engine is utilized with a 4×2 drive that meets European III emissions standards. The vehicle looks great and is well laid-out with its dual cabins and luxurious interior decoration. The operation cabin has an operation table with ample and comfortable working space. The drawworks cabin has hydraulic steel wire drawworks, hydraulic oil tank, electrically controlled hydraulic radiator, instrument rack, toolbox, tilting-type well site lamp and other devices. This type of truck is the optimum choice for well testing works in domestic oil fields.
 Drawworks System: It has a stepless- speed-adjusting function. It doesn’t need to change drawworks speed through automobile gearbox shifting, and therefore the operation is simple, balanced and easy with low noise.. The brake is equipped with an exterior-packed double-belt brake mechanism without a dead end. Hand brake devices and handling mechanisms are mounted in the operation cabin for flexible, convenient, safe and reliable operation. It is equipped with an automatic wire guider which can reduce labor intensity and worker force. The operator also can replace wire guider hangers according to steel wire sizes in order to meet different working requirements.
 Hydraulic Transmission System: The power is taken from the gearbox end for convenient operation. The hydraulic system utilizes a closed-circulation loop and volume variable stepless speed regulation. The SAUERDANFOSS90L75 variable oil pump and low speed big torque motors are produced by China-Italy joint venture and have been used to form a closed loop. It has a large adjustable speed scope to meet requirements of all kinds of working conditions. The system is equipped with safety valves and their pressure can be regulated and set freely. Overload protection is provided to maintain stable, simple and reliable operation.
 Wire Line Metering System: It mainly consists of sensors mounted on the wire guider and a metering panel mounted on the operation table. It is used to measure, display and set hole depth of the steel wires and steel wire pulling force on the drums. The metering panel can measure mechanical depth, electric depth, electric tension, and tension difference, and has safety alarm for convenient and reliable operation. ..
 Electrical system: DC power on the chassis can be used.
 Color: Its color can be determined according to users’ requirements and interests.
 

Chassis Type

NJ6683NR6

Drawworks

Capacity(ft)

22965.88(φ0.09〃wireline)

Hoisting capacity (Ibf)

2248

Hoisting speed  (in/s)

0~350

Drive way

4×2

The maximum speed(in/s)

1257.65

Wheel base       (ft)

12.96

Approach angle°

20

Departure angle°

9.5

Total mass under full load  (Ib)

10979

 

Engine

Model

SOFIM8140.43S3 (Europe Ⅲ)

Maximum power (hp)

123.37

Maximum torque (ft-lb)

210.20

Overall size (ft)

22.63×6.56 × 9.51

 
Previous: ES5061TSJ OILWELL TESTING TRUCK             Next: ES5045TSJ OILWELL TESTING TRUCK
Home | Chinese | Russian | Contact Us |     Copyright © RG PETRO-MACHINERY(GROUP)CO.,LTD. All Rights Reserved.